HELP PLEASE (Sonar 3/Yamaha DSP factory (DS2416). Can anyone please help here? I can't get any of my midi to play through Sonar 3 and my Yamaha DSP factory (DS2416). Any audio plays fine as do the DXI instruments. It is showing midi activity but alas no sound. I have installed the demo of xpi-software's DspCtrl 3.2.0 which installed fine but hasn't helped the midi playback. Because of this I am still using cakewalk pro audio V9 which as I remember (it was so long ago) I had the same problem until I installed the Audio X console and then it worked fine.
The Audio X console or any reference to the DspCtrl 3.2.0 does not appear in the Sonar 3 view menu however. I am using the latest WDM Driver. The driver version is 1.01.0014.1 Driver mode - WDM/KS I Have also tried - ASIO and MME 32 bit modes I am using a Midiman Midisport 8x8 with the latest driver (4.1.21) Has anyone please got any ideas? It's driving me mad (no pun intended). Cheers for the reply Giorgio the dspfactory (I owned and loved for years) is an AUDIO board and NOT a MIDI board I know it has nothing to do with the midi directly it's just the fact that nothing is coming in through the inputs of the DSP Factory in Sonar 3.
Sonar shows signs of midi activity but there is no sound. Any sound direct from sonar (Audio tracks or DXI's) are fine though. I run the exact same set up in CWPA 9 and everything is fine. I can have the 2 programmes open simultainiously with the same project loaded and flipping between one and the other CWPA works, Sonar does not. Any thoughts? Is your sound from the MIDI devices showing up in DSPCtrl? DspCtrl works separately from Sonar, but must be loaded before Sonar is loaded.
Once you are getting the sound from your MIDI devices showing up on the DspCtrl meters, then it is a matter of routing the sound from that particular DSP track to Sonar. What type of audio inputs are you using for the DSP factory? DSP Factory functions as an external mixer to Sonar: DSPF physical input - DSPF channel - DSPF channel assigned to DSPF Bus 1-8 - DSPF Bus 1-8 feeds Sonar audio inputs (listed as DS2416 ## Wave IN in Sonar) to Sonar tracks-Sonar tracks to Sonar busses-Sonar busses to other Sonar busses to DSPF inputs (listed as DS2416 ## Wave OUT in Sonar) Remember, Sonar has no control over the DSP Factory, that is why DspCtrl has to be loaded and running at all times. DspCtrl handles all the functionality of DSP Factory. To get the sound from the RCA analog in's of DSP Factory to Sonar: 1) The RCA's shoud be channel 17/18 on the DSP factory/DspCtrl. 2) Turn on buss 1/2 of Channel 17/18 with DspCtrl 3) Assign Buss 1/2 to Rec 1/2 with DspCtrl output assignment window (this is what sends the audio to Sonar inputs) 4) In Sonar, insert audio track then assign its input to DS2416 Stereo #1 Wave IN) (wave profiler should have been run and driver input/outputs assigned in Options-Audio beforehand step #1) 4b) Arm the track in Sonar (Press the Square R).
You should now see the meter moving to your audio coming through Channel 17/18 of the DSPF) 5) Assign output of the same Sonar track to the DS2416 Wave OUT #1. 6) In DSPCtrl Channel 1/2 assign the input for that channel to HD. The StMix button for that channel should also be turned on. This will get you going. You can set up templetes in Sonar and DspCtrl so you don't have to go through all these steps everytime you want to record.
It may be a good idea to dedicate one stereo track in DspFactory (I use channel 15/16) to the output from the Sonar mixer (do all mixing of Sonar tracks inside of Sonar) and use the other DSP Factory channels for just your hardware synth outputs.
This card starts dating unpeu, but is well made. With an AX44 and trs is comfortable and versatile. UTILIZATION No particular problem with the installation. The manual is Reduces its simplest form, since all gre via soft that you use!
Also the official website only in English, which is surprising from Yamaha. If you can use a mixing desk, you know utikiser the DSP Factory! GETTING STARTED Drivers. Broad topic for the DSP!
There are all kinds of drivers depending on your use of the card and software that you, unwanted. Basically, it's a mess!
Longer appropriate day for a long time. Cubase SX no problem under Win 98b, the top. Acid, SoundForge no problem. OVERALL OPINION I have this card since its release on the market in 1999 (I think). Its versatility and flexibility (when everything is stable and driver).
If you had to judge that performance, I'll put a 9 / 10. It's a good deal OCCAZ, especially naked couple and the AX44. What technical specifications motivated your choice? Above all, quality of convertos which I believe are still among the best in marchbr / Number of inputs and outputs DSP to use up effects without ever seeking the process of the computer - For what purpose? Use semi pro: Sound recording and mixing with a maximum effect and VSTi - What is your config (motherboard / CPU / Ram / Hard.)?
An old BCAN: Duron 800, 750 MB memory, 3HD (a total of 120 GB) - Which instruments or Systmes (console, prampli, DTD.) you use it and how connections? A small console BOSS, Studio Monitor, active bass, guitar, vocal microphone, various synths. UTILIZATION - Installation is it without problem? Yes, trs simple. Have you experienced any incompatibility? Strictly no, never a crash.
The configuration gnrale is easy? This is the default on the card: it is oriented pro and semi pro, and we must spend some time on it to understand the intricacies of the craft, especially with regard to the routing. The manual is clear and sufficient?
It should especially consider the manuals with which apps you use the card in my case, logic 5.5, and C. GETTING STARTED - The drivers are stable? Never any problem with W98 and XP.
Are they often put day? The latest are from 2002 but look great on XP. What software do you use most often? Gre because the map and all its wonderful effects.
What you get lag? 4 ms with VST and VSTi, 0ms with internal effects. How many tracks you get record / playback simultanment? March 2 audio VST or DX effects per track + card = 20 (never needed more) + VSTi = twenty OVERALL OPINION A great card. A little to the beginners as Drout pro. But the main thing as the sound and performance, it is at the top and not ashamed to face the competition given its current price in time.
In the era of its release in France, even if it was worth in the 1000 + 350 44 AXA. A 02R V1 in a PC. Its not going to comantaire! 24 tracks numrique In / Out 6 SPDIF in / out analog headphone output. Compreseur, EQ, reverb studio. Weak (not me) max 48Khz 32bit (Not Koi 24/96?).
Completely under SX VST ger sub part. Turns in a 1. PIII PC with ECC RAM 300GB SCSI U160 on. The max ram for VSTi 12ms latency in cubase. Mic and on VLZ Mackie. SOUND ancient as the good old days (Funky, Old School).
I use an AX-44 with a couple for music production. And a second for mixing Old School UTILIZATION - Installation is no problem under XP even with drivers following in 2001. Did you encounter incompatibility Intel chipsets are an absolute priorote. The configuration gnrale is easy? After a few sleepless nights are cool. GETTING STARTED - The drivers are stable? Yes 98SE ME XP and W2K - Are they often put day?
Not since 2001 but no new OS is not so. What software do you use most often? Cubase and Wavelab 5 + mintonka - What you get lag? 12ms - How many tracks you get record / playback simultanment?
6 I have a AX-44 OVERALL OPINION - How long have you use it? 1 year and if I had known. What is the particular feature you like best and least?
The effects per Comp, EQ, etc. Have you tried many other models before acqurir? 44 Delta, Pinnacle, Fitji, Mia noon SW1000XG, soundblaster (At the beginning I did not know ) - How do you report qualitprix? In the world of the top okaz - With the exprience, you do again this choice?
I have already done I took a second last month. The Incredible DS24/16! First of all, can not imagine using VST plugins, even if there is an ASIO driver that works on XP, latency. Is just too important. Enormously as the latency audio processing. That 'latte' good. This card is the motherboard of the Yamaha 02R, table well known for its efficiency, basically you have in cubase, table 24 tracks digital with all the trimmings of yamaha included hardware, multi-effects, compression, equalization (having said good) etc etc.
All for an affordable taken (the same card, I paid € 150 and it is enough). The quality of treatment is beyond reproach really very very good. Yes, there is a BUT. Use is tedious, I do not totally stupid, but there.
Yamaha Dsp A2070
I am really asking questions! Frankly, more complicated, I'm not sure that it exists.
It's a real nightmare, because you have to assign the tracks to be, the bus ds, either directly on the DS, in short, if you party with over 12 stereo audio tracks, after it gets hot hot hot (I do). So utlise gallery, after a year of use, I gave up and took a mia audio. Amor estranho amor completo dublado completo. The concept of the card (hardware of a real table while the interface in Cubase) is genial, and, moreover, that this is the only of its kind, the real problem, there is no follow-up yamaha, more drivers truly effective, using the software C-MEXX is the image of the map. A real mess complicated, and in addition, the ends plugsins VST. To my taste, it's a real headache and all this is a pity for such a good map.
UTILIZATION See above! GETTING STARTED See above! OVERALL OPINION See above!
FAQ for the Yamaha DSP Factory Known Trouble Q. Using the AX16-AT Q. Using the AX44 Q. Using with SW1000XG Q. Using Samplitude(Win)/SEK'D Q. Using CubaseVST24(Win)/STEINBERG Q. Using with Cakewalk(Win) Q.
Using LOGIC Audio(Win)/E-Magic Q. Using MxTrax(Win)/Minnetonka Q. Patch.exe, DS2416CK.exe, Driver Q. Macintosh G4 Mac G4 has supported on the v1.0.4b2 driver.(Oct.
29 1999) The following trouble has also removed by the latest driver,(Beta version) Noise problem on Macintosh Blue & White G3 Noise occurs on Macintosh Blue & White G3 with the following software.Logic Audio 3.7 or later -Digital Performer 2.5 or later Even one or two tracks of audio playback causes minor pops and clicks. General Make sure that the DS2416 is inserted in the PCI bus slot correctly. A test program is included with the DS2416 to make sure that the card,driver, and DSPs are functioning correctly. The PCI-slot with DS2416 may not function as the bus master, and the DS2416 will not work in such slots. Please change to the slot which function as the bus master.
Some PCI cards may conflict with the DS2416. Try removing cards, or swapping slots with the DS2416. Though we have tested the chipsets which should cover more than 90% of PC's available in the market, DS2416 does not work correctly on imcompatible chipset or mother-board. The list is available from the '3. System Requirement and Installation' from FAQ top-page.
If the number of tracks you use exceeds the computer's processing capability, a sync error occurs, which causes skipped sounds and pop noises. Reduce the number of recording or playback tracks using your application program. If the noise generated during recording or playback includes high frequencies and the symptom persists after you reduce the number of tracks, the hardware may be faulty. Consult your dealer or the nearest Yamaha Service Center.
If you pan normalized audio hard left or right using the DSP-Factory mixer parameter, the volume level is raised by a maximum of 3dB. This may cause distortion. Lower the volume level using the attenuator. Also, on general mixing consoles, the volume level of a sound panned hard left or right rises by 3dB relative to a sound set to the center. Sometimes Windows does not automatically recognize the contents of the FD inserted in the drive. In this case, just click OK. This file is included in the FD but the Windows does not recognize it automatically.
Select the FD drive and click OK. The PCI-slot with DS2416 may not function as the bus master, and the DS2416 will not work in such slots.Please change to the slot which function as the bus master. Since some DAT does not put the wordclock out when it stops, DS2416 can not play the source recorded from such DATs. Make sure that the wordclock source is selected Internal. And check that the recorded source is selected.
Problem encountered when DS2416 is selected in the Multimedia Property window: When double-clicking a.wav file on the desktop to play, audio is not output unless checking Use preferred device only in the Multimedia Property window. If you execute Patch.exe while no audio applications are running, ch ON, to Stereo of ch1/2, ST remains off and no audio is output. Macintosh Yes.
Both models are supported with using v1.0.4b2. The background playback may be disabled in audio software. CubaseVST24 4.0 Check OptionsMenu/Play in Background.
If you are using OMS, set Run in Midi Back Ground to active in the OptionsMenu/Midi Setup/OMS/OMS Midi Setup dialog. Vision DSP4.1. Check AudioMenu/Active in Back Ground.
Also, set Run in Midi Back Ground to Active in the SetUpMenu/OMS Midi Setup dialog. Digital Performer2.5 Check File/Preference/Other/Play in Background.
Select FreeMIDI Applications Only in FreeMIDISetup window File/FreeMIDI Preference/Software Compatibility. Yes, you can. Before a signal is sent to the DS2416, it is routed to the mixer application program you are using. In this way, you can use your plug-in effects within the virtual mixer. Logic Audio Gold/Platinum3.7 If you have selected File/Preference/Audio Extension/DS2416, you cannot use PlugIn Effects.
To use PlugIn Effects, de-select DS2416. Instead, select ASIO, control the DS2416 using MixTest, and use the DS2416 as an ASIO-compatible external audio card.
In this way, you can use two DS2416 cards with Logic Audio Gold/Platinum 3.7. Yes, you can.
The DS2416 does not have any restrictions or problems related to the use of plug-ins, although problems or restrictions may apply to some application programs. Currently, using Cubase VST 4.0, Vision DSP 4.1, and Logic Audio Platinum 3.6 simultaneously with the driver does not cause any serious problem with the DS2416. If some files are not loaded correctly when you start DS2416ck, the DS2416 will not operate correctly. Make sure that the following files are located in the specified location: DSPC Driver Extensions folder YMIX2416 Extensions folder DS2416 ASIO Driver Location specified by the application program you are using. In most cases, you should copy this file into the ASIO Drivers folder within the corresponding application folder. Use the Extension Manager to enable these extension files.
The DS2416ck MixTest can be located in any folder. It takes a few seconds to complete the change for the word clock source.
If you open the Control Panel before the change is completed, the slider will not appear. In this case, close the window, then open it again. In Audio Instruments & Routing Window,make sure that 'PCIPB1'and 'PCIPB1/2' in the Output window,at least one of them, should be activated The inactivated output module assigned to 'PCIPB1'and 'PCIPB1/2' cause not only the incorrect work but also the noise problem. Maximum Loudness in Audio Menu/AudioPreference may be set to +6db. Set this to +0db.
Using AX16-AT AX44 can be connected via AX16-AT up to 2 units. Since AX16-AT has loaded with ADAT/THRU switches to select ADAT optical or AX44. Signals input from A-IN on the AX16-AT are assigned to channels 9-16 and channels 16-24 in parallel.
Signals input from B-IN are assigned to channels 1-8. (If the DS2416 and the AX16-AT are connected via the IO-A or IO-B connectors) Refer to page 23 of the manual for more information on the input sources. You can route Stereo Out, Bus1-Bus8, and AUX1-AUX6 to not only AX16-AT but also other outputs.: SOURCE - DESTINATION Stereo Out Bus1-Bus8 AUX1-AUX6 - REC1-REC8 DS2416 analog outputs DS2416 D-OUT AX44 output 1-4 (first unit) AX44 output 1-4 (second unit) AX16-AT OUT.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |